www.lmp-pc.co.uk

Universal mount information.

The universal mount is made from the same stock parts as the full specification & close ceiling mounts but incorporates a universal adapter plate. You can order the mount with an extension tube as per the full specification mount, lengths available from 15cm to 50cm in 5cm increments.

The standard mount length is 12.5cm from ceiling to projector base. This can be reduced to 10cm by removing the spacer & re-assembled with the short bolt provided (the ceiling plate cover cannot be used in the 10cm configuration).

Included is:
Four arms giving a reach from 11.5cm to 21cm.
Four arms giving a reach from 11.5cm to 30cm.
Fitting kit with four each M4/M5/M6 screws washers/spacers & keys.

Options include:
Long arm kit extending reach to 35cm.
Long bolt/spacer kit.

If your projectors mounting points are less than 30cm apart, on the same level, with a near flat base the mount will fit out of the box.

Click here for a photo of the universal adapter plate fitted to the Panasonic PT AE100 (same as 200/300/500/700).

Larger image? Click Here.


©2002 LMP Products. All rights reserved. E.&O.E.
Site by